All parts on this page will fit
2001 Mustang Bullitt
Suspension Parts, Fluids, Sealants and Tools
 |
 |
||
| SN-95
Front Hub Retaining Nut. 94-04 Mustang |
SN-95
Front Hub Grease Cap. 94-04 Mustang |
||
| FT 6401 | $10.50 each | FT 6410 | $12.35 each |
 |
 |
||
| SN-95
Front Hub Motorcraft 94-04 Mustang |
SN-95
Front Hub TIMKEN 94-04 Mustang |
||
| FT 6450 | $114.00 each | FT 6455 | $74.95 each |
 |
 |
|
Hubcentric spacers. "EXTENDED STUDS REQUIRED" FRONT or REAR on SN-95 Mustangs. .400 Thick |
|
| FT 6570 | $179.95 pair |
 |
 |
 |
|||
|
2-1/2" Studs Set of 5 Must ream hub to 39/64"s to accept stud, Knurl length is 0.400" |
3" ARP Studs. Set of 5. Must ream hub to 39/64"s to accept ARP stud, Knurl length is 0.400" |
Stud installation in hub. Front or Rear hub. (per hub) |
|||
| FT 6576 | $25.50 | FT 6575 | $59.95 | FT 6575I | $15.00 |
Rear Differential cooling accessories
 |
|
| Rear
differential cooler kit. Kit includes a heat exchanger/fan assembly with -8 fittings, Tilton oil pump, 20 feet of -8 stainless braided line, three 90 degree -8 fittings, seven straight -8 fittings, one 90 degree swivel for the suction line, one AN-8 check valve, one 280 degree temperature gauge with sending unit. |
|
| FT 1370 | $985.00 |
Options for the FT 1370 differential cooling kit
 |
 |
 |
|||
| Wiring
harness with relays and on/off switches for differential cooler kit. |
In-line
strainer for differential cooler kit. |
Differential breather catch can. (COLOR MAY VARY) (Click for more info.) |
|||
| FT 1380 | $49.00 | FT 1381 | $95.00 | FT 1382 | $42.00 |
Fuel Filter
 |
 Fuel Filter Location |
| Motorcraft Fuel Filter '98 to '04 Mustang Ford part # 2M5Z-9155-CA |
|
| FT 89 | $25.95 |
 |
|
| Stifflers FIT
System Full Length Subframe Connectors with Matrix Bracing and Jacking Rails. Fits all SN-95 Mustangs |
|
| FIT-M01 | $569.95 |
Tools
 |
 |
||
| Four piece machinist's angle finder set. | 36mm Socket for
Halfshaft to Rear Hub Retaining Nut and Front Hub. |
||
| FT 2000 | $15.00 | FT 3600 | $19.95 |
 |
 |
||
| Fixed Caliper Piston Compressing Tool for 4 piston Brembo calipers. |
Universal general purpose
rear caliper piston retraction tool. |
||
| FT 9000 | $15.00 | FT 9010 | $55.95 |
Fluids and Sealants
 |
 |
||
| Amsoil 75W-140
Severe Gear Synthetic Extreme Pressure Lubricant. Quart |
Ford Synthetic rear axle lubricant. 75W-140 Quart |
||
| FT 1355 | $32.95 | FT 1360 | $36.50 |
 |
 |
||
| FORD
Friction Modifier for Ford Synthetic Axle Lubricant. |
Gray
Ford Motorcraft sealant. |
||
| FT 1365 | $10.50 | TA-29 | $17.00 |