All parts on this page will fit
1999 - 2004 Mustang Cobra
Suspension Parts, Fluids, Sealants and Tools
 |
 |
||
|
Aluminum Front Differential Supports with Aluminum shimming washers to set pinion angle. 99-04 Mustang Cobra * Note: Be sure to replace both the Front and Rear differential supports at the same time. |
Delrin Rear Differential Support. 99-04 Mustang Cobra * Note: Be sure to replace both the Front and Rear differential supports at the same time. |
||
| FT 1200 | $95.00 | FT 1300 | $50.00 |
 |
  |
||
|
FORD OEM Front Differential Torque Brace. 99-04 Mustang Cobra |
FTBR Front Differential Torque Brace. Gloss Black Powder coated. Click for more info 99-04 Mustang Cobra |
||
| FT 1290 | $862.00 | FT 1291 | $145.95 |
 |
 |
 |
|||
| Delrin Isolated
Rear Differential Lowering Mount Comes complete with the Delrin bushings installed. Shown mounted on a FT 1350M, milled Ford Racing rear differential cover. Differential cover not included. 99-04 Mustang Cobra * Note: Be sure to replace both the Front and Rear differential supports at the same time. |
New Ford Racing Reinforced IRS Rear Diff Cover including mounting hardware. 99-04 Mustang Cobra |
New Ford Racing Reinforced IRS Rear Diff Cover milled for clearance when using the FT 1401 Delrin isolated rear diff lowering mount. Hardware is included. 99-04 Mustang Cobra Purchase the FT 1350M and the FT 5001 bushing kit together and Save $50! Click here for combo deal. |
|||
| FT 1401 | $164.00 | FT 1350 | $279.00 | FT 1350M | $324.95 |
Rear Differential Rebuild Parts
 |
|
| SN-95
Cobra IRS Differential Hardware Set. |
|
| FT 1325 | $19.95 |
Rear Differential Cooling Accessories
 |
|
| Rear differential cooler kit. Kit includes a heat exchanger/fan assembly with -8 fittings, Tilton oil pump, 20 feet of -8 stainless braided line, three 90 degree -8 fittings, seven straight -8 fittings, one 90 degree swivel for the suction line, one AN-8 check valve, one 280 degree temperature gauge with sending unit. |
|
| FT 1370 | $840.00 |
Options for the FT 1370 differential cooling kit
 |
 |
 |
|||
| Wiring harness with relays and on/off switches for differential cooler kit. |
In-line strainer for differential cooler kit. |
Differential breather
oil catch can. (COLOR MAY VARY) (Click for more info.) |
|||
| FT 1380 | $49.00 | FT 1381 | $95.00 | FT 1382 | $34.50 |
 |
| Differential cover plumbing with FT 1401 Delrin isolated rear differential lowering mount. |
 |
 |
 |
 |
||||
| Amsoil Severe Gear Synthetic Extreme Pressure Gear Lubricant. 75W-140 Quart (2 quarts required for IRS, 1.3 qts actual) |
Ford Synthetic rear axle lubricant. 75W-140 Quart (2 quarts required for IRS, 1.3 qts actual) |
FORD Friction Modifier for Ford Synthetic Axle Lubricant. |
Gray Ford Motorcraft sealant. |
||||
| FT 1355 | $24.95 | FT 1360 | $27.95 | FT 1365 | $6.05 | TA-29 | $17.00 |
 |
|
||
| UHMW IRS Subframe support kit. 99-04 Mustang Cobra |
Oversize UHMW IRS Subframe support kit. Use when the outer metal sleeve has been removed. 99-04 Mustang Cobra |
||
| FT 1500 | $129.00 | FT 1515 | $159.00 |
 |
 |
||
| Front IRS Subframe Mounting Bolt Kit One pair of Grade 8, 9/16" bolts with nylock nuts and flat washers for the front subframe mounts. 99-04 Mustang Cobra |
SN-95 IRS
Rear Subframe Low Profile Hex Bolt Kit. (Pair) 99-04 Mustang Cobra |
||
| FT 1600 | $15.00 | FT 1650 | $19.95 |
 |
 |
 |
|||
| Delrin Upper control arm bushings and Hardcoated inner sleeves. 99-04 Mustang Cobra |
Delrin Lower control arm bushings and Hardcoated inner sleeves with shimming washers. 99-04 Mustang Cobra |
Combination UCA and LCA bushing grease fitting kit. |
|||
| FT 1000 | $125.00 | FT 1100 | $295.00 | FT 1700 | $25.00 |
 |
|
|
This Complete IRS Bushing Kit Includes: FT 1000 - Delrin Upper control arm bushings and Hardcoated inner sleeves. FT 1100 - Delrin Lower control arm bushings and Hardcoated inner sleeves with shimming washers. FT 1200 - Aluminum Front diff supports with Aluminum shimming washers to set pinion angle. FT 1300 - Delrin Rear Diff support. FT 1500 - UHMW IRS Subframe support set. FT 1600 - One pair of Grade 8, 9/16" bolts with nylock nuts FT 1700 - Combination UCA and LCA bushing grease fitting kit. (The cost of purchasing the kits individually - $717.00) (Save $18 and Free Domestic Shipping!) 99-04 Mustang Cobra NOW OFFERING FREE DOMESTIC SHIPPING ON OUR FT 5000, FT 5001 AND FT 5001/FT1350 COMBO DEAL KITS! Free shipping is UPS Ground service. There will be an additional charge for a faster service. |
|
| FT 5000 | $725.00 |
 |
|
| This Complete IRS Bushing Kit Includes: FT 1000 - Delrin Upper control arm bushings and Hardcoated inner sleeves. FT 1100 - Delrin Lower control arm bushings and Hardcoated inner sleeves with shimming washers. FT 1200 - Aluminum Front diff supports with Aluminum shimming washers to set pinion angle. FT 1401 - Delrin Isolated Rear Diff Lowering Mount. FT 1500 - UHMW IRS Subframe support set. FT 1600 - One pair of Grade 8, 9/16" bolts with nylock nuts FT 1700 - Combination UCA and LCA bushing grease fitting kit. (The cost of purchasing the kits individually - $831.00) (Save $32 and Free Domestic Shipping!) 99-04 Mustang Cobra Purchase the FT 5001 kit and the FT 1350M together and Save $40! See combo deal below. NOW OFFERING FREE DOMESTIC SHIPPING (UPS Ground) ON OUR FT 5000, FT 5001 AND FT 5001/FT1350 COMBO DEAL KITS! Free shipping is UPS Ground service. There will be an additional charge for a faster service. |
|
| FT 5001 | $825.00 |
FT 1350M and the FT 5001 Combo Deal
 |
|
|
Combo Deal:
SAVE $40 and FREE DOMESTIC SHIPPING! Purchase the FT 1350M, Milled Ford Racing Reinforced IRS Rear Differential Cover and the FT 5001, Complete IRS Bushing Kit with the Delrin Isolated Rear Differential Lowering Mount together and save $40! That's like getting the milling done for free! NOW OFFERING FREE DOMESTIC SHIPPING ON OUR FT 5000, FT 5001 AND FT 5001/FT1350 COMBO DEAL KITS! Free shipping is UPS Ground service. There will be an additional charge for a faster service. |
|
| FT 5001 and FT 1350M | $1104.00 |
 |
|
||
| OEM IRS Bushing removal/installation
tool set. WITH BUSHING KIT PURCHASE ($59 Refunded when returned) (Return anytime, No time limit) |
Without Bushing Kit Purchase No Refund |
||
| FT 2100 | $89.00 | FT 2100 | $109.00 |
 |
 |
 |
|||
| Deluxe Bumpsteer/ Upgraded Toe Link Kit. (replaces all OEM toe link components) 99-04 Mustang Cobra (click here for more info and individual components) |
10 Piece Bumpsteer Spacer Kit. These are extra spacers you may need for other projects. (Not needed for the FT 1860 kit) |
Adjustable sway bar end link kit. 99-04 Mustang Cobra |
|||
| FT 1860 | $264.00 pair | FT 1855 | $10.25 | FT 1900 | $55.00 pair |
 |
 |
||
| IRS Eccentric Camber Adjusting Bolt. 99-04 Mustang Cobra 2 required per vehicle. |
SN-95 Inner
Toe Link Hardware Set. |
||
| FT 1050 | $19.95 each | FT 1865 | $7.95 |
 |
 |
||
| SN-95
Front Hub Retaining Nut. 94-04 Mustang |
SN-95
Front Hub Grease Cap. 94-04 Mustang |
||
| FT 6400A | $10.50 each | FT 6410 | $12.35 each |
 |
 |
 |
|||
| SN-95 Front Hub Motorcraft 94-04 Mustang |
SN-95
Front Hub TIMKEN 94-04 Mustang |
2-1/2" or 3" stud
installation in hub. Front or Rear hub. |
|||
| FT 6450 | $114.00 | FT 6455 | $74.95 | FT 6575I | $15.00 per hub. |
 |
 |
||
| Currently unavailable | |||
| SN-95 Ford Racing IRS Knuckle Bearing. 99-04 Mustang Cobra |
SN-95 Timken Double Tapered Roller IRS Knuckle Bearing. (Same as Ford Racing bearing) 99-04 Mustang Cobra |
||
| FT 6600 | $79.00 | FT 6601 | $54.95 |
 |
 |
||
| SN-95 Ford Racing Cobra IRS Rear Hub. 99-04 Mustang Cobra |
SN-95 Ford Racing Cobra IRS Rear Hub. Clear Zinc Plated. 99-04 Mustang Cobra |
||
| FT 6550 | $159.00 | FT 6550P | $174.00 |
 |
 |
|
FTBR SN-95 Cobra IRS Rear Hub. Clear Zinc Plated. 99-04 Mustang Cobra |
|
| FT 6555 | $109.95 |
 |
 |
||
|
FTBR SN-95 Cobra IRS Rear Hub with 2.5" studs installed. Clear Zinc Plated. 99-04 Mustang Cobra |
FTBR SN-95 Cobra IRS Rear Hub with 3" ARP studs installed. Clear Zinc Plated. 99-04 Mustang Cobra |
||
| FT 6556 | $144.95 each | FT 6557 | $179.95 each |
 |
 |
 |
|||
|
Original OEM SN-95 Ford IRS Halfshaft Retaining Nut. No longer available from FORD. 99-04 Mustang Cobra |
Duplicate of the Original OEM SN-95 Ford IRS Halfshaft Retaining Nut. 99-04 Mustang Cobra |
SN-95 Ford IRS Halfshaft Retaining Nut. 99-04 Mustang Cobra |
|||
| FT 6500 | $75.00 each | FT 6501 | $29.50 each | FT 6500A | $6.95 each |
 |
 |
 |
|
 |
|||
|
Replacement Retaining Ring for knuckle bearing. |
Knuckle Snap Ring Tool | ||
| FT 6650 | $3.95 each | FT 6655 | $12.95 each |
 |
 |
|
Hubcentric spacers. "EXTENDED STUDS REQUIRED" REAR ONLY! |
|
| FT 6570 | $179.95 pair |
 |
 |
|
|||
|
2-1/2" Studs Set of 5 Must ream hub to 39/64"s to accept stud, Knurl length is 0.400" |
3" ARP Studs. Set of 5. Must ream hub to 39/64"s to accept ARP stud, Knurl length is 0.400" |
2-1/2" or 3" stud installation in hub. Front or Rear hub. |
|||
| FT 6576 | $19.95 | FT 6575 | $55.00 | FT 6575I | $15.00 per hub |
 |
 |
|
| Temporarily unavailable | ||
| '03-'04 Terminator 31 spline, Ford OEM halfshaft. New in box. FORD Part # 2R3Z 4K138 AA. |
Replacement
halfshaft boot. Universal fit - Silicone Includes clamps and grease packet. Specify Inner or Outer |
|
| FT 6700 | $799.00 each | FT 6705 |
New Knuckle Assemblies
 |
 |
||
| Currently unavailable. | |||
|
New
OEM Ford complete knuckle assembly. Right Hand Side Ford part #2R3Z-5A968-AA (Passenger Side) Hardware not included. 99-04 Mustang Cobra Price includes a $500 core charge that will be refunded when used core is returned. Cores cannot be damaged beyond repair or the FORD 1999 recalled knuckle assemblies. |
New OEM Ford complete knuckle assembly. Left Hand Side Ford part #2R3Z-5A969-AA (Drivers Side) Hardware not included. 99-04 Mustang Cobra Price includes a $300 core charge that will be refunded when used core is returned. Cores cannot be damaged beyond repair or the FORD 1999 recalled knuckle assemblies. |
||
| FT 6800 RH | $2,695.00 | FT 6800 LH | $1,695.00 |
Remanufactured Knuckle Assemblies
 |
 |
||
| Remanufactured knuckle assembly. Blasted and shot peened knuckle casting. New Timken double tapered roller bearing. New clear zinc plated FTBR hub. New FT 6150 booted cross axis joints. Splash shield and Hardware NOT included. Right Side (Passenger Side) Price includes a $500 core charge that will be refunded when used core is returned. Cores cannot be damaged beyond repair or the FORD 1999 recalled knuckle assemblies. |
Remanufactured knuckle assembly. Blasted and shot peened knuckle casting. New Timken double tapered roller bearing. New clear zinc plated FTBR hub. New FT 6150 booted cross axis joints. Splash shield and Hardware NOT included. Left Side (Drivers Side) Price includes a $300 core charge that will be refunded when used core is returned. Cores cannot be damaged beyond repair or the FORD 1999 recalled knuckle assemblies. |
||
| FT 6800-RM RH | $1,385.00 | FT 6800-RM LH | $1,035.00 |
 |
 |
||
| Used SN-95 IRS Knuckle Splash Shield. Condition Varies. Sold As-is, No Returns. Right Side (Passenger Side) |
Used SN-95 IRS Knuckle Splash Shield. Condition Varies. Sold As-is, No Returns. Left Side (Drivers Side) |
||
| FT 6801 RH | $45.00 | FT 6801 LH | $45.00 |
 |
|
| Knuckle Hardware Kit. (Hardware for one rear knuckle) |
|
| FT 6806 | $56.75 |
Cross Axis Joints for rear knuckle
 |
 |
 |
 |
||||
| Cross Axis Joint for Rear Knuckle. 99 thru 04 Mustang Cobra. These will NOT fit the 99 Cobra recalled knuckle assemblies! |
Cross Axis Joints including the Removal/Installation tool set. SET OF 4. 99 thru 04 Mustang Cobra. These will NOT fit the 99 Cobra recalled knuckle assemblies! |
Cross Axis Joint with protective boot for Rear Knuckle. 99 thru 04 Mustang Cobra. These will NOT fit the 99 Cobra recalled knuckle assemblies! |
Cross Axis Joints with protective boots including the Removal/Installation tool set. SET OF 4. 99 thru 04 Mustang Cobra. These will NOT fit the 99 Cobra recalled knuckle assemblies! |
||||
| FT 6100 | $67.50 | FT 6120 | $295.00 | FT 6150 | $85.00 | FT 6170 | $339.00 |
 |
 |
||
| Cross Axis Joint Removal/Installation Tool Set. 99-04 Mustang Cobra |
Replacement Boot for the OEM Cross Axis Joint. These boots fit the FORD OEM Cross Axis Joints only. 99-04 Mustang Cobra |
||
| FT 6110 | $30.00 | FT 6106 | $6.00 each |
Fuel Filter
 |
 Fuel Filter Location |
| Motorcraft Fuel Filter. '98 to '04 Mustang. Ford part # 2M5Z-9155-CA |
|
| FT 89 | $15.00 |
Subframe Connectors
 |
|
| Stifflers FIT System Full Length Subframe Connectors with Matrix Bracing and Jacking Rails. Fits all SN-95 Mustangs |
|
| FIT-M01 | $459.00 |
Tools
|
|
|
| OEM IRS Bushing removal/installation tool Set.* WITH BUSHING KIT PURCHASE ($59 Refunded when returned) (Return anytime, No time limit) |
|
| FT 2100 | $89.00 |
| Without Bushing Kit Purchase. No Refund |
|
| FT 2100 | $109.00 |
| *We offer the OEM Bushing Removal Tool Set to our customers as a service. We offer the tool set with the option to return the tool set after use for a refund, to save our customers money. We do not make any profit on this item. That is why we are forced to charge $109 (without the option to return the tools after use for a refund) for the tool set, to those who do not purchase our bushing kits. |
 |
 |
||
| Four piece machinist's angle finder set. | 36mm Socket for Halfshaft to Rear Hub Retaining Nut and Front Hub. | ||
| FT 2000 | $15.00 | FT 3600 | $19.95 |
 |
 |
||
| Fixed Caliper Piston Compressing Tool for 4 piston Brembo calipers. |
Universal general purpose rear caliper piston retraction tool. |
||
| FT 9000 | $15.00 | FT 9010 | $44.95 |
